How can I avoid frizzy hair after blow drying?
Good question.
You might be wondering why this happens because when you use heat, your hair’s strands turn into a serious mess of frizz?
Yes, the mirror doesn’t lie.
It’s a sometimes painful glimpse of reality that you might not like to see frizz and all.
Oh!
You’re lucky because you could be unaware of the key methods to achieve a perfect blowout at home.
Could that be possible?
We dive deep to find the essentials to get rid of that frizz one and for all!
Imagine spending the whole day outside with no frizz. Wouldn’t that be amazing?
Here’s what we’re discovering. You are able to jump to whatever interests you, or go through the entire article chronologically.
Blot the Damp Trade In your Terry Towel For This
To eliminate Mr Frizzy, it all begins by getting your hair to “not soak wet” quickly. This is also known as rough dry.
The typical process includes a towel, and then the blow dryer in the same order.
Doing this incorrectly and by that we mean that letting the blow-dryer blast your wet hair everywhere, will not reduce frizz. What it does is cause the cuticle of your hair to raise, which can lead to split ends and tangles and, of course, frizz.
Additionally, you’ll expose your hair to heat for much longer, and this is harming your hair more.
The majority of beauty experts will adhere to a two-step procedure that begins with a towel which is not just any towel.
When you’re done with the shower you’ll wish to blot the hair using a towel till it’s not dripping wet anymore.
Simply pull your hair back into your towel to rid yourself of any excess water.
Only do this after you have untangled your locks with care using a wide tooth comb.
But we just mentioned not just any towel did we not?
Tips: Make sure to always wear a microfiber or clean t-shirt rather than letting any terry cloth get in the way of your hair.
Here’s three advantages of using microfiber hair drying towel
They absorb significantly more water than terry cloth
When you start your blow dryer session with your hair not as wet and this will reduce the risk of heat exposure.
Reduces frizz-related risks – which is the main reason isn’t it?
Tip: Never rub your hair with a towel, even if it’s just lightly or much less aggressively. This is a sure way to cause hair frizz and trouble before you’ve even started the hair dryer as it can roughen up the cuticle.
The aim is to minimize friction, which can create chaos by manipulating the hair shaft, making hair frizz-prone.
It’s the exact rough texture of terrycloth towels that they can do. (If you’re looking to know more, you may research more to find out everything you’ve ever wanted to know about the reasons why microfiber towels are superior over the terry cloth.)
It’s a relief. Was a bit engrossed in raising the issues with the terry cloth.
The most important thing is to squeeze out the water gently from your hair, not scrub it off using your towel.
After you’ve gently squeezed out the most water you can, you want, wrap your hair and allow the towel or tshirt carry on absorb the water in the hair.
It shouldn’t take a long time. You’ll only need to absorb the excess water which takes about 10 minutes max. In the event that you leave your hair wrapped in a towel can cause flattening of the roots.
Alternatively, you may also pat your hair using your favourite tshirt and leave it for about 3 to 5 minutes and let it absorb whatever moisture remains.
Better late than never tip: Make sure that every time you shampoo your hair, apply the shampoo to the root and to the scalp. Do not apply any shampoo on the ends! No need. It could dry the ends further than they currently are.
Got it? Now let’s move back for a moment and review an additional step to your journey to a frizz-free life.
The good news is that frizz caused by blow drying can be a hassle and products will definitely solve the problem by choosing the perfect ones for YOUR hair.
If you’re looking for silky hair, the one battle you won’t afford losing is the one that’s constantly fighting humidity.
For a successful outcome, you’ll want to search for the perfect leave-in conditioner, serum or hair masks to keep your hair moisturized. Argan oil can’t hurt either.
It’s not necessary to utilize all of them. The goal is to keep it simple and use only what is necessary to complete the task.
However, we’d like to highlight some things that you can come across that must be maintained in order to ensure that their locks are and are hydrated.
Argan Oil: Apply it prior to blow drying and as a smoothing product, it can be used to control frizz as well. Apply a few drops to damp hair to give it a smoother, more smooth finish. This product gives you soft, silky hair without a greasy feeling.
Better late than never tip: Unlike shampoo and because you’re looking for sleekness, it’s generally best to put products with these types of properties on the hair ends, or no higher than the mid-strand or an ear high?
Still Rough Playing?
We are now at the second step of rough drying which is blow drying.
Please understand that any blow dry involves and requires only fingers. This means it’s not the right time to pull the brush. The goal is to have your hair around 75-80 percent dry.
If you’ve reached that point, it’s time for serious tool time. The brush and dryer come together to create the polished and sleek style you’re looking for. This is where your approach will kick in.
Science
Science is that ions that cling to water are charged positively. When they cross paths with negative ions emitted by an ionic air dryer, the droplets become dispersed and shrink.
Okay, the droplets are blown up literally, which results in quicker drying time since smaller droplets dry quicker. A faster drying time is healthier hair.
This is one reason.
Why is the second reason?
It is possible that you have discovered what others have is that you’re left with a more sleek and polished look. In addition, you’ll notice shinier hair strands and less frizz due to the fact that the negative ions decrease the surface tension.
That’s why anyone who is serious about having frizz free hair should look into the use of ionic hair dryers. Don’t you deserve a frizz-free blowout?
Time to Focus
The next step is to pull out that concentrator nozzle as it is an essential to use it if you are looking forward to a frizz free blowout.
In one way, the nozzle offers a safe distance between the business-end rim of the dryer and the hair. This is the area where hair gets the most heat.
Tip: It’s not a good idea to have the nozzle to rub in your hair. It’s best to keep at least 3 inches away from it and your hair. The goal is to smoothen and create shiny, not frizzy hair.
You’ll also notice the nozzle’s end is very thin. This helps to focus the flow of air to prevent burning your locks all over the place , like those inflatable tube people that you’ve seen in automobile dealerships.
Tip: Depending on how you use your dryer , the concentrator must be positioned or attached like on a clock face that runs from 12 to 6, not 9-3.
The idea is that you should focus the air on the hair that is directly behind your brush, across the entire width of your brush. It is not necessary to run the whole length of the section that you’re doing.
Here’s what you should know about concentrators.
Pay attention to how your hair can be suffocated and the reasons why you shouldn’t do it!
Do not use any thermal brushes
You may want to see whether avoiding the use of thermal brushes makes an impact on the frizz issue.
The thermal brushes are marketed as vital blow-out tools.
The barrels of a lot of them become too hot, which causes greater, and not lesser frizz. And, of course, a smoothing that is less satisfying.
Then there’s those stiff plastic bristles. If you think that terry cloth is rough on hair, think about what these little suckers could do as you brush them across your sensitive hair shafts, which are snagging along the way.
Too harsh.
If that’s the case, what’s the next thing to look for? The ideal mix is boar bristles and SOFT nylon. For grip, you can use a synthetic material and natural bristles that smooths the hair strands.
Density is important too. It is important to pack the bristles close enough so that the brush has a strong grip on hair.
For those who don’t, here are three quick reminders on brushes:
You’ve probably already figured out that the bigger the brush , the more the volume. The longer the locks, the greater the diameter of the brush you’d like to use.
A consistent tension while using the brush will help stretch your strands a little bit, which will help straighten them appropriately. You need brushes that pull at the root and make every hair strand smooth and silky.
Make sure that the hairline is given sufficient attention. This is the area that can be the difference between a successful or unsuccessful blow-out. If you have the appearance of a frizz breakout around your face, that’s all people will observe.
However, it might not appear like a brush could be that crucial in blowouts, it might be.
No-Fail Technique Tips
Technique plays an important role in the way how smooth or sleek your hair appears.
The first step is to work on smaller sections. This is crucial. If you don’t do it, everything else you do after that will not be of any significance.
Sectioning properly ensures that each strand is dry completely.
Tip: The width of any section should not be wider than the brush.
Another important idea is to direct the air that comes out of the dryer along to the shaft of hair. This is yet another rule that should not be violated.
The blasting of your hair with the air flowing downwards smooths the cuticles and adds shine. If you’re blowing in a direction that is against the grain then frizz and flyaways will be there.
Tip: Try moving out of the steamy and hot bathroom while blow drying may be helpful. Think about it. Do you not like going upstream to fight all the humid air in the bathroom in order to get your hair dry after showering?
Tip: Always focus on your bangs first as they have a tendency to air dry quickly and leave you with a frizzy mess.
It is also helpful to think of your brush differently. Imagine it as one huge velcro roller.
So, the concept isn’t to drag it continuously through your hair, so that you twirl (wrap) the hair (kept in a tight and tense position) around your brush while you move downwards from the roots towards the ends of hair. This is followed by the concentrator, which soaks locks with the warmth of the dryer while you move.
The hair is stretched gently to straighten it.
Another idea is to work in the opposite direction that is likely to be laid after the blow out is completed.
Tip: If your hair is still frizzling again (that is a word, isn’t it?) First, are you certain that your hair is fully dry? Don’t misunderstand dry with hot since even a hint of moisture can cause hair to become poofy when humidity is present.
Tip: If a section is completely dry, it’s a good suggestion to provide it with a cold shot to help set the hairstyle. This could also help you search for any strands not completely dry.
Tip: If your hair is drying completely, a hair finishing spray can help. The best method to achieve this is by spraying the hair spray onto your brush, then brush through your hair.
Four things to take away:
With the hair becoming more and thicker, it is very important to section the hair. Instead of rough drying the entire head, it is crucial to section the hair, section-by-section on the warm heat setting prior to beginning the round brushing process.
The emphasis is on rotating or spinning the brush during heat application.
The clipping up and away of hair that you’ve dried completely eliminates the possibility of it becoming wet again and exposes it to the risk of frizz. Also, make sure that no wet hair touches hair that you’ve dried.
The warm setting of your blow dryer is suitable for hair that’s hiding under more hair. Use the hot setting for any hair to reduce the possibility of frizz.
Leave A Comment